Nakamichi NDST500A


        Nakamichi JAPAN is introducing its latest Digital Signal Processor to their NDST lineup with the NDST500A Hi-Res DSP with built-in amplifier. The NDST500A has been designed with 12 channels to allow for a wide variety of aftermarket sound integrations as well as time correction and equalizer tools to fine tune the acoustics within the vehicle.
        The NDST500A is designed from the ground up to be Hi-Res capable, while carrying on features from the NDS series of DSPs which include ease of installation with OEM or factory systems with a selection of customized OE fit cables, Nakamichi head unit, or any other compatible brands of aftermarket head units.
       The NDST500A also comes with a built-in amplifier providing 10 channels of output power (RMS 2CHx80W, 4CHx40W, 4CHx25W @4Ω) for installations without requiring an external amplifier, just add on a Nakamichi active subwoofer and you are good to go.
       The included Nakamichi remote control with large control knob can be installed cleanly on the vehicle’s dashboard for easy volume and bass adjustments and source selection. Music can also be streamed using the NDST500A’s Bluetooth connection, bypassing the head unit altogether.


Product Data

Dynamic Range(RCA Input) ≥100dB
S/N(RCA Input) ≥90dB
THD ≤0.05%
Frequency Response 20Hz~20KHz
Input Impedance High Level Input:240Ω
Low level Output Impedeance 51Ω
Signal Input Range RCA: 7.5Vpp; High Level: 26Vpp
Signal Output Range

RCA: 8Vpp;

Amplifier Power

PEAK: 4CH×50W+4CH×80W+2CH×160W, Bridging 1×300W
RMS: 4CH×25W+4CH×40W+2CH×80W

Working Temperature -20-70℃
Power DC9V-16V
REM Input  High Level Input Signal:H1+/H1-or ACC control cable
REM Output +12V Start up Voltage Output
Standby Power ≤0.1W
Gross Weight Approx. 2.08kg
Product Dimension(L×H×W) 255×175×47mm


Technical Sheet

Input  Type 6 Channel high level,2 Channel Low Level,External digital Bluetooth,Optical coaxial
Output Type 12 Channels low  level,4CH×50W+4CH×80W+2CH×160W,Bridging 1×300W
Output Gain Gain range:Mute,-59.9dB~0.0dB
Output Signal EQ

31 band Equalizer Engine,
1.Frequency Range:20Hz~20KHz,1Hz Accuracy
2.Q value(Slope):0.404~28.85
3.Gain:-12.0dB~+12.0dB,0.1dB Accuracy

Output Signal Crossover Each output is equipped with multi-order high and low pass indepance filters.
1.Filtering types:Link-Rill,Butter-W, Bessel
2.Filtering frequency division  point:20Hz~20kHz,Resolution 1Hz
3.Filter slope(Slope) setting:6dB/Oct to48dB/Oct and OFF
Output Phase and Time Alignment Each output channel can be adjusted for phase and delay,parameter range :
phase:in-phase or reverse-phase(0°/180°);
Delay: 0.000 to 20.000 ms, 0 to 692 cm,0 to 273 inch.
Presets Save 6 presets into the device.

You may also like

Recently viewed